Humminbird 967C User Manual

Page 75

2D/3D Priority

2D/3D Priority allows you to change the

way the 6 beams on the transducer are used in order to prioritize and
customize the 2D and 3D display of information.

Select 2D Only when you wish to look at 2D views and want the 2D
information to be updated quickly (if you are looking at the 3D/2D Combo
View, the 3D side of the screen will be empty and the message "3D Disabled"
will be displayed.)

Select Equal when you are switching between 2D only and 3D/2D views,
and you want the 2D information to be updated more slowly while
maintaining the 3D data display.

Select 3D when you want to see the most detailed 3D information;
2D information will be updated most slowly with this choice.

To change the 2D/3D Priority:

1. Highlight 2D/3D Priority on the 2D Sonar X-Press™ menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the

2D/3D Priority. (2D Only, Equal, 3D, Default = 3D)

Cancel Navigation

(only when Navigating)

Cancel Navigation discards the current route and exits Navigation Mode.
This menu choice will only appear when you are currently navigating a route.
This will not delete a previously-saved route.

To Cancel Navigation:

1. Highlight Cancel Navigation on the 2D Sonar X-Press™ menu.

2. Use the RIGHT 4-WAY Cursor Control key to initiate canceling

navigation.

3. The Confirm dialog box will appear. To cancel navigation, press the

RIGHT Cursor key once more. To avoid canceling navigation, press
the LEFT Cursor key.