Humminbird 967C - Manual (Page 41)

4-WAY Cursor Control Key
The 4-WAY Cursor Control Key has multiple functions,
depending on the situation:
Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will
freeze the display in the Sonar View and a cursor and cursor dialog box will
be displayed. The cursor can be positioned on the Sonar View using the 4-
WAY Cursor Control key.
Active Cursor - In any Bird's Eye View, the 4-WAY Cursor Control key
controls the motion of the eyepoint. In any Chart View, the 4-WAY Cursor
Control key pans the charts.
NOTE: In either Freeze Frame or Active Cursor mode, you can also make the
cursor move diagonally by pressing in between two of the arrows on the 4-WAY
Cursor Control key.
Menu Selection - Use the DOWN or UP arrow keys to select a menu choice
from the menu list, then use the LEFT or RIGHT arrow keys to change a menu
setting.
Snapshot and Recording View - In the Snapshot and Recording View,
highlighting a recording icon and pressing the Right 4-WAY Cursor Control
key starts recording playback, and the Right and Left keys are used to control
the speed of playback.
Change 3D Perspective - Use any arrow key to change the perspective in
the 3D Sonar View. Subsequent presses of arrow keys rotate and tilt the 3D
representation.
NOTE: Menu choices are implemented and saved immediately - no further action
is required.
VIEW PRESET keys
The VIEW PRESET keys are used to program your three favorite
views for quick retrieval. Instead of using the VIEW key to
cycle through every view to find the one you want, you can program the
VIEW PRESET keys to display a specific view immediately. To program each
VIEW PRESET key, use the VIEW key to cycle to the view you want to store.
Press and hold one of the VIEW PRESET keys for several seconds. A series of
audible chirps will be heard indicating that the view has been programmed
to the key. You can store up to three views, one on each key.
EXIT Key
The EXIT key has multiple functions, depending on the
situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and
return to the view.
• If a menu is active, pressing EXIT will return to the previous level in
the menu system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling
display.
• If the Cursor is active, pressing EXIT will remove the cursor from the
display.
33