HP zt3000 User Manual
Page 160
Power Cord Set Requirements
Maintenance and Service Guide
B–3
United Kingdom
BSI
1
United States
UL
2
Notes
1. The flexible cord must be
2
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law.
The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm
2
conductor size. The wall plug must be a two-pole grounding type with
a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
3-Conductor Power Cord Set Requirements
(Continued)
Country
Accredited Agency
Applicable Note
Number
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM