beautypg.com

HP zt3000 User Manual

Page 129

background image

Removal and Replacement Procedures

Maintenance and Service Guide

5–39

2. Disconnect the SD Card slot board cable 1 from the system

board.

3. Remove the PM2.5×5.0 screw 2 that secures the SD Card

slot board to the notebook.

4. Remove the PM2.5×5.0 screw 3 that secures the SD Card

slot board cable ground loop to the notebook.

5. Remove the SD Card slot board and cable.

Removing the SD Card Slot Board and Cable

Reverse the above procedure to install the SD Card slot board
and cable.

325388-002.book Page 39 Friday, October 24, 2003 9:21 AM