Hitachi VM-E220A - Manual (Page 45)

General Maintenance - 45 -
The playback picture moves rapidly
and noise appears. Also sound
speeded up from normal is heard.
§ The camcorder is set to the double
speed playback mode. Pressing the
playback button to restore the
normal playback mode. The sound
also returns to the normal speed
Noise appears in the picture during
double speed playback, but this does
not indicate a fault. See page 30 for
details.
BATTERY CONDITION
Symptom Check Point & Correction
The ( ) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
§ Try another battery or charge the
battery.
NO OPERATION IS ACCEPTED
Symptom Check Point & Correction
Power is turned on, but no button
operations are accepted
§ Remove the power source and the
date/title battery. And, after about
one minute, the display in the
viewfinder will be reset. Then set
the information again.
The camcorder does not operate when
alkaline batteries are inserted
§ Check that the polarities (+, -) of the
batteries are correct. Insert six
batteries.