Hitachi VM-E220A - Manual (Page 32)

Advanced Techniques - 32 -
1. Recorder's Remote Control
The shaded buttons on the remote control have the same functions as the corresponding buttons on the
camcorder.
2. S.EDIT (Synchro Edit) Button (only on the remote control)
Use this button to activate the synchro edit function for dubbing ("Using Synchro Edit", P.46).
3. TITLE ON/OFF Button (only on the remote control)
Use this button to create and record titles for your tapes ("Creating and Recording a Title," p.43).
4. COUNTER RESET Button (only on the remote control)
Use this button to reset the linear timer counter to 0:00:00.
5. DISPLAY Button
Use this button to select the viewfinder and TV display ("Using the Display Button," p.42). This button can be used
instead of the DATE/TITLE button on the camcorder in the VIDEO mode.
6. A/V DUB BUTTON (only on the remote control)
Use this button to record new audio and video over existing audio and video.
Remote Control Range
Use the wireless remote control to operate the camcorder from a distance. The PLAY, F.FWD, REW, STOP,
PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate the functions of the
corresponding buttons on the camcorder. Aim the wireless remote control at the infrared receiver of the
camcorder.
Note: Use the wireless remote control within the range of the infrared receiver of the camcorder shown
above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright
artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared receiver. The wireless remote
control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR with the same
code your Hitachi VCR may malfunction when you use the camcorder's wireless remote control.
How to attach the optional remote control holder to a generally available
shoulder strap
It is recommended that you fit the remote control into the holder and attach the holder to the shoulder strap so as
not to lose the remote control and for convenience when shooting outdoors.
1. Attach the holder to the shoulder strap.
2. Attach the remote control to the holder. Fit the remote control into the holder as shown in the figure below and
push until a click is heard.