Hitachi VM-E220A - Manual (Page 24)

Basic Techniques - 24 -
Note: When you engage play/pause mode the still picture will have some interference or noise. This is
normal.
Using Forward and Reverse Search
When looking for a particular point in your videotape use the F.F button and REW button to find the spot quickly.
• Press F.F button during playback to play the tape forward at approximately 9 times normal speed. Press PLAY
button to return to normal playback.
• Press REW button during playback to play the tape backwards at approximately 7 times normal speed. Press
PLAY button to return to normal playback.
Note: When you engage F.F button or REW button the picture will have some interference or noise. This is
normal during search mode.
To Play Back a Recording at Double the Normal Speed
Activate the video playback mode by moving the CAM/OFF/VIDEO switch to "VIDEO". Press the PLAY button
located on either the remote control or the camcorder one time and the video will appear in the viewfinder or a
connected monitor. While the tape is playing press the PLAY button again and the camcorder will now play both
audio and video at double speed.
To restore normal playback, press the PLAY button on either the remote control or the camcorder.