Hitachi VM-E220A - Manual (Page 34)

Advanced Techniques - 34 -
• When a recorded tape is in the camcorder during the VIDEO mode, "SEARCH" appears in the viewfinder. (Refer
to "Date Search" on page 37).
• Pressing the DISPLAY button a second time returns to the linear time counter.
Note: The linear time counter with the memory feature in the viewfinder can also be displayed on the
connected television.
Creating and Recording A Title
Create titles easily and personalize your recordings while keeping a permanent visual record of what is contained
on a tape. The camcorder can store a title in its memory. A title stored in memory can be displayed and recorded
at any time. A title contains two lines of up to 16 characters per line. The camcorder contains 47 different
characters for creating a title. When creating and recording a title, use the TITLE ON/OFF button on the remote
control.
Note: When creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead
of the TITLE ON/OFF button on the remote control. " TITLE" should be displayed in the viewfinder at this
time.
Note: Be sure to insert the clock battery before creating a title. Although a title can be created without the
clock battery inserted, it will disappear when the battery providing power to the camcorder is removed.
Creating a Title
1. Connect the camcorder to a power source.
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO.
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the viewfinder.
4. Use the STOP button to place the cursor where you wish to begin your title.
5. Use the F.FWD and REW buttons to select the first character of your title.