Hitachi VM-E220A - Manual (Page 26)

Advanced Techniques - 26 -
- the cassette is replaced.
- you select AUTO and date display again.
- the recording is less than 10 seconds long.
Note: If the date changes while recording continues over 10 seconds, the new date is recorded for about 10
seconds the next time you make a recording.
TITLE and Date - Automatic Title and Date Recording
This option records the date and created title (see "Creating and Recording a Title" on page 43) automatically
once a day at the beginning of recording for 10 seconds.
Note: When TITLE is displayed in the viewfinder, the title cannot be turned on or off using the remote
control.
Date - Date Recording
The camcorder records the date with the picture all the time.
No Display - No Date Recording
The camcorder does not record the date.
Date and Time - Date and Time Recording
The camcorder records the date and time with the picture all the time.
3. Press the start/stop button. Recording will start.
Note: When AUTO and date display is selected, the date disappears about 10 seconds after recording is
started.
Note: When TITLE and date display is selected, the title and date disappear about 10 seconds after
recording is started.
Using the Power Zoom
The power zoom W control widens the picture, moving the subject farther away, while the power zoom T control
brings the subject closer, narrowing the picture. If ZOOM appears at the left of the viewfinder, the digital zoom
function shown below has been engaged.
When the power zoom switch is operated, the zoom position is displayed in the viewfinder for about 5 seconds
and then disappears. The zoom position is displayed in 10 steps.