Connecting the autodesk control surface, Connecting the, Autodesk control surface – HP XW8400 User Manual
Page 26: Surface, Connecting, The autodesk control surface
Connecting System Components
3
22
Connecting the Autodesk Control Surface
The Autodesk control surface consists of three panels. You can use any combination of one or
all of them. If using more than one panel, you must use the network switch included with your
shipment to cross-connect them.
Refer to the Autodesk Control Surface User’s Guide for information on how to use the control
surface with Lustre.
N
OTE
:
The illustrations in this procedure only show the central module, i.e. the colour grading
panel. This is the only panel that has a USB connection for the integrated tablet, and a network
port. The other two panels only have a network port which you connect to the network switch.
4. Connect the workstation to video I/O
components.
“Connecting Video I/O to a Master or HD Station”
5. Connect the workstation to a high-speed
data link device.
“Connecting to a High-Speed Data Link Device
(HSDL)”
Step:
Refer to: