Power consumption – HP Vectra 500 Series User Manual
Page 23
23
1 HP Vectra 500 Series
System Overview
Power Consumption
NOTE
The figures given below are valid for both the minitower and desktop computers
with a standard configuration—no expansion cards and no CD-ROM drive. For
other configurations, the power consumption values will be higher.
NOTE
When the PC is turned off with the power button on the front panel, the power
consumption falls below 5 watts, but is not zero. The special on/off method used
by this PC considerably extends the lifetime of the power supply. To reach zero
power consumption in “off” mode, either unplug the PC from the power outlet
or use a power block with a switch.
Typical Power Consumption/Availability for ISA Expansion Card Slots
Typical Power Consumption/Availability for PCI Expansion Card Slots
1.
The power supply in the computer continues to supply power to the
CMOS memory, even when turned off.
Full Power Mode
<44 W
Standby Mode
<29 W
Suspend Mode
<24 W
Off
< 5 W
1
+ 5 V
4.5A limit per slot (limited by system board)
+ 12 V
1.5A limit per slot (limited by system board)
- 5 V
0.1A total power limit (limited by power supply)
- 12 V
0.3A total power limit (limited by power supply)
+ 5 V
4.5A maximum per slot
+ 12 V
0.5A maximum per slot
- 12 V
0.1A maximum per slot