Switching source signals, Adjusting the volume – HANNspree 9.6" Liquid Crystal Display LT01-10A1 User Manual

Page 28

Switching Source Signals

Press the

SOURCE

button on the

remote control or the

button on

the control panel to select the
incoming source signal.

The current source setting CH xx
appears on the top left corner of the
screen; TV or AV appears on the
bottom right corner of the screen.

Note:

The TV supports S-Video input in addition to normal video and audio sig-

nals. The TV detects the signal type automatically and gives priority to S-

video when two signals are detected at the same time. This auto detection

function is only available for AV2.

Adjusting the Volume

Press the

VOL UP

button to increase

the volume. Press the

VOL DOWN

button

to decrease the volume. The

volume level is displayed on the TV.
Press the

MUTE

button on the

remote control to turn the sound off.

The word “Mute” appears on the top

left corner of the screen and sound

is temporarily turned off.
Press the MUTE button on the

remote control or press VOL UP

button or VOL DOWN button to

restore the original volume.

TV/AV

Current source setting

CH 40

Volume up

Volume

down

Mute