Honeywell BENDIX/KING KLN 94 - Manual (Page 88)

B
KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page 2-84
TABLE 2-3 GPS SYSTEM ERROR CODES
NOTE
If any error code appears other than the ones listed above, contact Honeywell
Product Support at (913) 782-0600.
GPS System
Error Codes
Definition Suggested Action
KLN 94
System Error
Code XXXX System Error Codes reflect an
error detected deep in the system.
Some of the numeric codes will be
described below: Most of the System Errors require the attention of a
service center. Please note as many details as
possible when the failure occurred and identify if it
is repeatable.
001 Initialization Failure
003 Failed Powerup Self-Test
006 Exception Interrupt Detected. The
processor received an undesirable
interrupt request. Cycle the power and see if the error is repeatable. If
repeatable, take the unit to a Service Center.
017 Run Time Database Checksum
Failed. An error was detected on
the internal NAV database chip. Bad internal NAV database chip. Return for service.
025 ADC reference failed. The
reference voltage to the Analog to
Digital Converter is not at a proper
level.
101 Unit Not Responding
102 Bad Application Program
103 Invalid or Missing Database Card