Heath Zenith All MetAl Motion SenSor HD-9260 - Manual (Page 8)

-8- 598-1188-02
Finish Mounting
❒ Align the JourneyMan ® cover plate, gasket,
and the mounting bracket hole. Secure with
M5 x 0.8 x 40 mm mounting screw supplied.
❒ Push the rubber plug firmly into place.
❒ If not installed on a weatherproof box, caulk
between the cover plate and mounting sur-
face with silicone weather sealant.
To obtain maximum lamp
life, keep the tubular
lamps horizontal.
Specifications
CAUTION: To Avoid Fire Or Burn Hazards:
• Allow fixture to cool before touching. The bulb and the fixture
operate at high temperatures.
• Keep fixture at least 3" (76 mm) from combustible materials.
Do not aim at objects closer than 3' (1 m).
• Use only type T 250W (max.) tungsten halogen 120 VAC
lamps.
Rubber Plug
Range .......................... 70 feet (21.0 m); 100
feet (30.5 m) with Range
Boost. Varies with sur-
rounding temperature.
Sensing Angle ............. Up to 270° (Adjustable)
Fixture Load ................ Up to 500 Watts Maximum
Tungsten Incandescent
[Up to 250 Watts maxi-
mum each lamp holder.]
Sensor Load Capacity . Up to 1000 Watts (8.3
amps), Maximum Tung-
sten Incandescent
Power Requirements ... 120 VAC, 60 Hz
Operating Modes ......... TEST, AUTO, and MAN-
UAL OVERRIDE
Time Delay .................. 1, 5, 20 minutes
HeathCo LLC reserves the right to discontinue
products and to change specifications at any time
without incurring any obligation to incorporate
new features in products previously sold.