HP 2000C - Manual (Page 31)

Maintaining and Replacing Printheads
4 Grasp the top of the used printhead by its handle, and
pull it up and out of its socket.
Caution: Keep new and used printheads out of the reach of children.
5 Remove the new HP No. Printhead from its
package and hold it by its colored handle. Being
careful not to touch the gold-colored metallic strip
on the printhead, gently remove the transparent
protective tape covering the electrical contacts and
ink nozzles.
6 Holding the printhead by its handle, match the
printhead label color to the socket label color. The
ink connector pin should be positioned toward the
front of the printer.
Insert the printhead into its socket, pushing it down
firmly. Then, lower its handle back to the flat position.
All four printheads must be correctly installed for the printer to operate.
Replacing a Printhead
32 Section 1 Printing Basics
Y B C M Y
M C
B
Y B C M Y
M C
B
ug_guts.qxd 4/2/98 1:01 PM Page 32