HP 2000C - Manual (Page 30)

Section 1 Printing Basics
Maintaining and Replacing Printheads
1 Make sure the printer power is on.
2 Open the ink cartridge door, then lift and remove the
printhead access cover (on the right side of the printer).
The attention light flashes while the cover is open.
The metal printhead latch tab prevents the printhead latch from being
opened when the printer is not turned on.
3 Open the printhead latch.
a) Lift the purple printhead latch, then pull the latch
forward and down to release the latch hook from
the purple carriage lock.
b) Push and lift the latch toward the back of the printer
so the printheads are completely revealed. The latch
should rest on the back of the printer.
Replacing a Printhead
31
B C M Y
B C M Y
C M Y
B
ug_guts.qxd 4/2/98 1:01 PM Page 31