Hotpoint DDP-700 - Manual (Page 34)

MODEL NAME
D DP-700
USER GUIDE
PAGE
1. Press up to select
REGISTER
menu.
2. Press . Your D DP-700 LCD will display BS 1 2 3 4. One (1) is flashing indicate that this handset
has been register to base 1.
3. Press 2, to select that this handset will be register to another base #2 (other than the original base).
4. Enter the current PIN code of your D DP-700 system. Press .
Your handset is now looking for Base # 2; SEARCH 2 will display on your D DP-700 handset.
5. Press and Hold the Page key on Base # 2 where you intend to register this handset until it will emit 2
beeps. Your base is now in subscription mode.
6. The handset will subscribed to the base shortly, if not, put the handset closer to the base. Your D DP-700
base will automatically assigned your handset number based on the free handset registration. If you
handset become HANDSET 3 after registration, this means that this base has already register 2 handsets,
and your handset is the third to registered.
Register another D DP-700 base
For registration of another DECT GAP compliant base to your D DP-700 handset, you should know the procedure for
registration of this base and the PIN code. Please refer the User guide (User manual).
Another DECT GAP compliant base
EXPANDING YOUR DECT SYSTEM
31