Hotpoint DDP-700 - Manual (Page 24)

MODEL NAME
D DP-700
USER GUIDE
PAGE
This function will set the handset or base to ring first when an external incoming call takes place. You can set
the number of rings takes place on the device prioritized before other will ring. When base is the priority to ring
first, CID inforamtion will only appear on the LCD when handset start to ring. While the base is ringing, press
the talk key on handset will not seized the line. Wait till the handset will ring and then press talk key.
PERSONALIZED YOUR SETTING
21
Ring Priority
1. Press up to select BASE menu.
2. Press .
3. Press to select
RINGER
4. Press .
5. Press to select
PRIORITY
.
6. Press .
6.1 Press to select
NO
6.1.1. Press , ring priority is off.
6.2 Press to select
YES
6.2.1. Press , ring priority is active and effect your setting.
6.3 Press to select SETUP
6.3.1 Press
6.3.2 Press to select Base, Handset1, Handset2, Handset3, Handset4 and Handset5
6.3.3 Press .
6.3.4 Press to select rings : 1,2,3,4,5,6,7,8 and 9
6.3.5 Press . You must set your D DP-7 00 to YES to take effect ring priority settings.
7. Press to exit RING PRIORITY or repeat step 6.
8. Press and hold to exit ring priority and return to standby mode.