Hotpoint DDP-700 - Manual (Page 32)

MODEL NAME
D DP-7 00
USER GUIDE
PAGE
EXPANDING YOUR DECT SYSTEM
Adding new handset
Your D DP-7 00 Mini DECT cordless phone is a GAP compliant (Generic Access Profile) which can access and
interwork with other GAP DECT. You can register up to five GAP DECT handsets to your D DP-7 00 base.
The handset number is displayed at the right side upper corner of the LCD of your handset. It is label as 1 to 5.
Your original handset is the first to be registered to your base, so, it is labeled as HANDSET 1.
To register another D DP-7 00 handset to your base; you should know your D DP-7 00 system PIN code. This is a
numerical digit code (maximum of 8 digits). It was preset to 0000. You can changed this PIN code if you like that
your D
DP-7 00 cordless phone system will not access by other person.
You cannot register another handset to your D DP-7 00 if you don not know the PIN code.
29
1. Press up to select REGISTER menu of the new handset to be register to your D dp-7 00 base.
2. Press . Your D DP-7 00 LCD will display BS 1 2 3 4. One (1) is flashing indicate that this handset
has been register to base 1.
3. Press 2, to select that this handset will be register to another base #2 (other than the original base).
4. Enter the present PIN code of your D DP-700 system. (default code is 0000). Press .
Your handset is now looking for Base # 2.
5. Press and Hold the Page key on Base # 2 where you intend to register this handset until it will emit 2
beeps. Release the page button. Your base is now in subscription mode.
6. The handset will subscribed to the base shortly, if not, put the handset closer to the base. After registra-
tion, your handset number will be HANDSET 2.
Another D DP-7 00 handset
For registration of another DECT GAP compliant handset to your D DP-70 0 base, you should know the procedure for
registration of this handset and the PIN code of your D P-700 base. Refer to the user manual.
For setting your D DP-7 00 base to subscription mode, press and hold your base page key until two beep emit and
then release. Your base is now in subscription mode.
Note :
Due to D
DDP-7 00 have clock features (time and date stamp on the LCD), some GAP DECT Phone can work well with
DDP-7 00 base, however, if this Handset don’t have clock and date stamp on the LCD, it may result to auto-paging
this handset.
Another DECT GAP compliant handset