Hotpoint DDP-700 - Manual (Page 29)

MODEL NAME
D DP-7 00
USER GUIDE
PAGE
0. Press to select
HANDSET
menu.
1. Press
2. Press to select CLOCK .
3. Press
4. Press to select AUTOMATIC, SET CLOCK , OFF or ON.
4.1 Auto calibration
4.1.1 Press .
4.1.2 Press to select
YES
or
NO.
Note : When you select to “YES”, the time will be base on the TIME of the Telephone
Network. The time setting by your will be obtain from the time of
Caller ID. This is best if you don’t want to set the time and just relay on the
telephone network time. If set to YES, make it sure that CID is available in your
telephone service. (Note : CID FSK with date and time only).
4.1.3 Press .
4.2 Set Clock
(Please refer to page 6- the clock)
4.3 ON - Set TIME and DATE display on your handset
4.3.1 Press . This will display the time and date in your D DP-700 handset
4.4 OFF - Turn off the TIME and DATE display on your handset
4.3.1 Press . This will not display the time and date in your D DP-7 00 handset
5. Press to exit CLOCK or repeat step 4 to 5.
6. Press and hold to exit handset programming mode and return to standby mode.
PERSONALIZED YOUR SETTING
Set the clock
26