Hotpoint DDP-700 - Manual (Page 26)

MODEL NAME
D DP-700
USER GUIDE
PAGE
4.4 Range (if your D DP-70 0 is out of coverage, it will emit a tone, if set to ON)
4.4.1 Press to select
RANGE
menu
.
4.4.2 Press
4.4.3 Press to select
YES or NO.
4.4.4 Press . A confirmation tone is heard.
Note :
In any case, Press to exit, press 2 times to exit Warning Tone Programming
and go to standby mode.
Your D DP-700 will display the time you take in using the handset during conversation. This feature can be turn on
and off.
1. Press to select
HANDSET
menu.
2. Press
3. Press to select
TIMER
.
4. Press .
5. Press to select
YES or NO.
6. Press . A confirmation tone is heard.
7. Press to exit CALL TIMER or repeat step 3 to 6 to set call timer again.
8. Press and hold to exit handset programming mode and return to standby mode.
The call timer
PERSONALIZED YOUR SETTING
23