Heath Zenith PF-4160-AB - Manual (Page 5)

5 598-1165-05
❒ Caulk fixture mounting surface with
silicone weather sealant.
❒ Install one 100 Watt maximum light bulb.
❒ If so equipped, install the fixture top. Secure
with decorative screws.
❒ If you will not be installing the optional tail
assembly, install the decorative nut onto
the bottom of the fixture now.
Slide the fixture onto the
mounting screws and
tighten nuts.
Junction
Box
Optional Assembly
❒ If so equipped, you may install the decora-
tive tail as shown below.
1. Screw in
extension bar.
2. Add tail piece
and trim.
3. Install
decorative nut. Bottom trim piece
has drain hole
Hex nut
4162 Top Assembly
Larger piece
on top
COMPLETE THE INSTALLATION
❒ Stuff the wires into the junction box. Make
sure the wires from the fixture go through
the wire path, and no wires get pinched.