HP DL120 User Manual
Page 38
Removal and replacement procedures 38
c.
Push the HDD 1 carrier towards the front of the chassis, and then slide it out completely (3).
d.
Remove the four mounting screws that secure the HDD 1 module to its carrier (4).
Reuse these screws when you install the new hard drive.
e.
Remove the HDD 1 module from its carrier (5).
f.
Place the old hard drive on a static-dissipating work surface or inside an anti-static bag.
g.
Proceed to step 5 for instructions on how to install the new hard drive module.