Heat & Glo Fireplace ESCAPE 36DV - Manual (Page 40)

Heat & Glo • Escape-36DV • 2012-900 • Rev. AB • 10/08 40
LOG #8
(SRV2012-166):
Place log #8 on top of log #5. The
fl at bottom of log #8 sits on the large
fl at area of log #5. The burned end
of log #8 rests on the second vertical
tine from the right of the grate. Slide
the log to the right until the “burner
chunk” on the bottom of the log rests
against the grate tine.
Final Step:
Place MYSTIC EMBERS generously
around on the fl oor of the fi replace.
Some can be spread out on the
burner surface to blend the transition.
Place embers around the pilot wires
to disguise the wires from view.
Save the log instructions for
future use.
8
5