HP 300X - Manual (Page 32)

3-6 Installing External Print Servers
On the back of the HP JetDirect 300X (J3263) and 500X (J3265) Print
Servers, there are LEDs that indicate the operating speed (10Mbps or
100Mbps) (Figure 3-3). (This only applies to 10Base-T and 100Base-TX
networks.)
Figure 3-3 Back of HP JetDirect 300X Print Server. (For the
HP JetDirect 500X, the LEDs are also located next to
the RJ-45 port.)
If the 10 (left)
LED is... And the 100
(right) LED is... Then the print server has...
Off or blinking Off or blinking No link established.
On Off Link established at 10 Mbps.
Off On Link established at 100 Mbps.
Auto-negotiation
Switches 10 & 100
LEDs
qsF00_en.book Page 6 Monday, June 26, 2000 3:15 PM