HP 300X - Manual (Page 31)

Installing External Print Servers 3-5
External Pri
n
t
Servers
3
When you first press the Test button, the Status and Activity LEDs
are on and solid for about 5 seconds. Then they switch off, indicating
they are cycling through the PDLs.
LEDs
On the top of the print server are Status and LAN Activity LEDs:
Between the Status and LAN Activity LEDs is the Test button, used
to print a configuration page. See “Verifying the Hardware
Installation” (page 3-4) for more information.
If the Status
LED is... And the
Activity LED
is...
Then the print server is...
Off Off Not receiving power.
On Off On; no LAN activity detected.
On Blinking On; LAN activity detected.
Off On (Solid) Encountering a fault during self-test or operation.
Blinking Off Encountering one of the following conditions:
● running a self-test
● not configured.
● not able to attach to the network.
On On On; heavy LAN activity detected.
qsF00_en.book Page 5 Monday, June 26, 2000 3:15 PM