Hitachi VT-UX605A User Manual
Page 74
Care and Servicing (Problems)
- 74 -
Poor picture
TV channel selector on the
Set TV to channel 3
quality ("noise")
proper channel?
or 4 as correct for
during playback.
your area. (Set TV to AUX or VIDEO if
you
have
a
direct
video
hookup.)
Is TV correctly tuned?
Fine tune the TV.
Static lines through the pic-
Press 1 or 4 button to adjust tracking.
ture?
"Noisy" picture despite all
Have video heads cleaned by a qualified
previous adjustments, even
service technician.
when
playing
different
cas-
settes?
No picture
TV set to the correct video
Set TV to channel 3 or 4
during
viewing .channel?
TV cannot be
Is VCR remote control pro-
Follow instructions in
operated by
grammed for your TV?
Advanced Operations
the VCR's
to program the remote
remote control
to send signals that your TV can rec-
ognize.
(Not
all
TV
brands
are
compatible.)
Is remote control set to
Press the TV device
control the TV?
button, then press the button
corresponding
to
the
TV
function
you
want.
Cannot store
Was 1 TAPE NAVIGATION
Switch it to
tape data in
memory NAVIGATION
MENU?
Is the recording time too short? Data is not stored in memory when the
recording time is less
than
5
minutes
(less
than
15
minutes
in
EP
mode).
Is tape data memory full?
Delete unnecessary tape data
LIMITED WARRANTY
Hitachi Home Electronics (America), Inc. and Hitachi Sales Corporation of Hawaii
("Hitachi",) warrants this component in duration as stated below:
* VIDEO CASSETTE RECORDER
* CAMCORDER
* AC ADAPTER CHARGER
* 90 DAYS LABOR (Carry-in)
* 1 YEAR PARTS (Except Battery)
Conditions of Hitachi Limited Warranty