Hitachi VT-UX605A - Manual (Page 70)

Advanced Operations (Camcorder) - 70 -
Advanced Operations (Camcorder)
Copying Tapes From A Camcorder
If you would like to copy a video tape shot in your camcorder onto your VCR, here's how
to do it.
Connect the camcorder's AV output cable to your VCR. (see diagram below)
Camcorder to VCR Hookup Illustration
* It is not necessary to connect the S-VIDEO jack.
Press the AVX button on the VCR's remote control so that the L2 (Line) indicator
appears in the VCR display.
Press REC/IRT on the VCR to start recording.
Press PLAY on your camcorder to start copying your tape.
Information on Audio Hookup
If your camcorder is only capable of monaural output (one audio jack) connect it to the
AUDIO IN L/MONO input on the front of the VCR.