Often encountered problems – Hitachi VT-UX605A User Manual
Page 73
Care and Servicing (Problems)
- 73 -
For more information about how to obtain these accessories, please call TOLL FREE 1-
800-448-2244 for your nearest Hitachi Authorized Parts Distributor in the continental
United States. For ALASKA and HAWAII, please contact the nearest Hitachi Regional
office.
Design and specifications subject to change without notice.
Often Encountered Problems
Problem
Things
to
Check
Solution
No Power.
Power cord plugged in?
Connect the power
cord
to
AC
outlet.
Delayed
Program set to the correct
Reset the delayed recording.
recording does
channel?
not work.
Program time and date set
Reset the delayed recording.
correctly?
VCR power turned off?
Turn power off to activate the
timer.
Safety tab removed from
Put cellophane tape over the
the videocassette?
tab area, or use a videocas-
sette
with
the
safety
tab
intact.
Clock set to "--:--"?
Set the time, then program
delayed
recording.
Delayed
Has power failure of more
When the auto clock set
recording does
than one hour occurred?
function is operating, the
not work even
time may be reset even after
when the clock
a power failure of more than
is set correctly.
one hour. However, pro-
grammed
delayed
record-
ings
will
have
been
cleared
and
must
be
reset.
Does not record
Safety tab removed from
Put cellophane tape over the
when you press
the videocassette?
tab area, or use a videocas-
REC.
sette
with
the
safety
tab
intact.
TV program
Loose or inappropriate
Review hookup directions
cannot be
connections between VCR
and make correct, firm con-
viewed
or
and
TV?
nections.
recorded.
VCR's display lights Was "1 CLOCK SET
The auto clock set function is
for several seconds
operating. This does not
after the power is
the CLOCK SET screen?
indicate a fault.
turned off.
Problem
Things
to
Check
Solution