Hitachi VT-UX605A - Manual (Page 56)

Basic Operations (Tape Navigation) - 56 -
Tape recorded by another VCR
Tape recorded with TAPE NAVIGATION
Tape whose tape data has been deleted
Screen displays:
When the MENU button is pressed with tapes - loaded, the following screens will
appear.
When the tape data memory becomes full, the following screens will appear when a
recording is made or when the timer is programmed. Delete unnecessary tape data
(See page 61).
Dubbing:
Tape Navigation does not operate with tapes on which only audio is recorded or
dubbed from a CDV (compact disc video).
Contents of data stored in memory when pause is engaged during recording:
The program number does not change even if pause is engaged during recording. If
the channel is changed after pause is instructed, the program number will change.
Tape data when a new recording is made on a recorded tape:
Example 1
If you record program D on the tape where programs A and B were recorded using
Tape Navigation for the same duration of time as program A:
In other words, Program D will over write Program A (Program A is entirely erased).
Example 2
If you record program D on a tape on which programs A, B and C have been recorded
using Tape Navigation: