HP 2045 - Manual (Page 56)

Appendix
50
6
Punch
With the optional finisher installed, holes can be punched into printed output.
Punch Position
The specified punch position varies depending on the paper feed orientation
and print data orientation. The following table shows punch positions:
Note
❒ Hole positions will vary slightly from page to page as holes punched on each
page.
Reference
For information about paper sizes that can be punched, see “Specification”,
General Settings Guide.
For printing methods, see the printer driver Help.
The punch position will vary when using the PostScript 3 printer driver. For
details, see the PostScript 3 printer driver Help.
GPSTPL5E
Paper Orientation
on the Machine Print Data
Direction
Punch Position
Vertical
Vertical
Horizontal
Horizontal
2 holes 3 holes 4 holes