HP 2045 User Manual
Page 28
Troubleshooting
22
4
Driver setting error. (Memo-
ry)
There is an error in the down-
loaded font(s).
Reset the parameter for down-
loading fonts.
Insufficient memory or memo-
ry settings for the printer driv-
er may not match memory
actually installed.
Specify correct memory capac-
ity in the [Change Accessories...]
option in the RPCS™ printer
driver's print settings tab.
To print the image correctly,
increase memory capacity, or
reduce resolution image.
Duplex has been cancelled.
Duplex printing has been can-
celled.
Confirm that the paper used is
suitable for duplex printing.
Or, increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
Ethernet board has a prob-
lem.
An error has occurred in the
Ethernet board.
Turn off the main power
switch, and on. If the message
appears again, contact your
sales or service representative.
Exceeded max capacity of
document server. Cannot
stored.
Hard disk drive capacity ex-
ceeded storing to the docu-
ment server.
Delete files stored in the docu-
ment server or decrease the
file size to be downloaded.
Exceeded max number of
files of document server. Can-
not stored.
The maximum number of files
stored in the document server
has been exceeded.
Delete files stored in the docu-
ment server.
Exceeded max number of
pages of document server.
Cannot stored.
The maximum number of pag-
es stored in the document
server has been exceeded.
Delete pages stored in the doc-
ument server or decrease the
number of pages to be down-
loaded.
Exceeded Max. stored files in
sample print and locked
print.
The maximum number of
stored files has been exceeded
during Sample Print or
Locked Print.
Delete stored files or reduce
file sizes.
Exceeded Max. stored pages
in sample print and locked
print.
The maximum number of
stored pages has been exceed-
ed during Sample Print or
Locked Print.
Reduce the number of pages
to be printed.
Exceeded Max. pages.
Collate is incomplete.
The maximum number of pag-
es has been exceeded for colla-
tion.
Increase memory capacity.
When adding a memory mod-
ule to the machine, contact
your sales or service represen-
tative.
Finisher is in use for another
function. Please wait.
The finisher is in use by anoth-
er function such as the copier
function.
Wait until the other function
has finished using the finisher.
Messages/Second messages
Description
Solution