HP 2045 - Manual (Page 37)

Other Printing Problems
31
4
Note
❒ If the problem cannot be solved, contact your sales or service representative.
No transmission
when you use
1394 interface con-
nection Check using the following procedure:
A Confirm the IEEE 1394 interface cable is connected securely.
B Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
C Unplug the IEEE 1394 interface cable connected to the computer.
D Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM labeled “Printer Drivers and Utili-
ties”:
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E Restart the computer.
Printing stops and
a paper error is
displayed if the
custom size paper
in the paper feed
tray is specified
when printing
with the Post-
Script 3 printer
driver. Follow the one of the procedures below:
• Press [Job Reset] on the display panel to stop printing. Place the custom
size paper in the bypass tray, and then start printing.
• Select the paper feed tray with custom size paper, and then press [Con-
tinue] to force printing.
When connecting
the machine using
the USB 2.0 inter-
face, the first page
of a print job that
contains a large
volume of data is
printed, and the
rest of the pages
are not printed. Confirm that USB Printing Support is installed on your computer.
Reference
See “Installing the Printer Driver Using USB”, Printer Reference 1.
Problem Causes, Descriptions, and Solutions