Hitachi VT-FX600A - Manual (Page 34)

TIMER RECORDING - 34 -
NOTE: If you have not yet set the clock, "SETTING CLOCK" appears. If so, follow the steps [4] to [10] on pages
14, 15. Then, set the timer recording.
3 Select your desired program number (1 ~ 7)
Program number which is not set up flashes.
Press CH or button repeatedly until your desired program number appears. (Example: 1)
Then, press SELECT button.
4 Select once, daily or weekly recording
For once recording:
Press CH or button repeatedly to point to "ONCE". Then, press SELECT button.
For daily recording: To record a TV program at the same time on the same channel every day. (Example:
Monday through Sunday)
Press CH or button repeatedly to point to "DAILY". Then, press SELECT button.
For weekly recording: To record a TV program at the same time on the same channel every week. (Example:
every Monday on channel 7 at 5:00PM)
Press CH or button repeatedly to point to "WEEKLY". Then, press SELECT button.
Make sure...
• If you did not set your desired digit within 2 seconds after pressing CH or button during steps [5] to [8],
the input mode will forward to next step.
• When you press SELECT button after pressing CH or button during steps [5] to [8], you may forward to
next step.
• Press ADD/DELETE button to go back one step from current step during steps [3] to [9].
5 Set the date when you want to start
First, press CH or button repeatedly until your desired month appears. (Example: "05" for May)
Next, enter a date. (Example: "06" for the 6th)