Hitachi VT-FX600A - Manual (Page 13)

MTS (Multi-Channel Television Sound) SYSTEM - 13 -
4] While VCR is set in HIFI stereo mode. HIFI appears on the TV screen. While VCR is set in monaural (MONO)
mode, HIFI disappears from the TV screen.
NOTE: If you play non-HIFI tapes while the VCR is set in HIFI, HIFI will disappear from the TV screen and the
VCR play automatically in monaural.
MTS RECORDING/MONITOR MODE
* You must select the recording mode in TV STEREO or SAP when you record a broadcast. Refer to "TO
SELECT STEREO OR SAP MODE" on the next page.
THE SELECTION MTS SYSTEM
NOTE: You must use the remote control for this procedure.
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR.
(CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
TO SELECT HIFI MODE
1 Select the main menu
Press MENU button. The main menu appears on the TV screen.
2 Select "VCR SET UP"
Press CH or button repeatedly to point to "VCR SET UP".
Then, press SELECT button.