Hitachi VT-FX600A - Manual (Page 26)

SEARCH - 26 -
4 Select "RENTAL" to [ON]
Press SELECT button so that "RENTAL ON" will appear on the TV screen.
NOTES:
• Once you select the rental play mode, it stays in effect even after you turn off the VCR.
• Selecting ON or OFF must be done in the play mode only.
TO STOP PLAYBACK
Press STOP button.
TO EXIT THE RENTAL PLAY MODE
Repeat steps [1] to [3]. Then, press SELECT button so that "RENTAL OFF" appears on the TV screen.
SEARCH
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR.
(CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
• You must use the remote control for the following procedure.
• A video cassette must be inserted in the VCR for these functions to work.
COUNTER MEMORY
This feature can be used to memorize a beginning point that you want to review. And you can search it easily by
rewinding or fast forwarding.
• Insert a prerecorded tape.
• If the counter is not displayed, the Counter Memory will not be activated. Press SELECT button so that
the counter appears on the TV screen.
1 Stop the tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review.
2 Reset the counter to 0:00:00
Press COUNTER RESET button.
3 Select the Counter Memory mode
Press COUNTER MEMORY button so that "M" appears on the TV screen.