Hitachi VT-FX600A - Manual (Page 29)

SEARCH - 29 -
for 3 programs)
5 Begin Index Search
Press REW or F.FWD button. The VCR begins rewinding or fast forwarding to the beginning of desired program.
Note: Every time an index signal is skipped, the number in the program indicator decreases by one.
6 After Index Search
When the preset program is reached, the VCR will start playback automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in recording mode.
• Procedures must be followed within 30 seconds, from steps [3] to [4]. Otherwise the Index Search mode will be
cancelled.
• Press STOP button to exit the Index Search mode.
BLANK SEARCH
This function enables you to search for the unrecorded portion of the tape in the forward direction.
• Tape must be fully rewound.
1 Select the main menu
Press MENU button.
2 Select "SEARCH SELECT"
Press CH or button repeatedly to point to "SEARCH SELECT".
Then, press SELECT button.
3 Select "BLANK SEARCH"
Press CH or button repeatedly to point to "BLANK SEARCH".
Then, press SELECT button.
• The VCR begins fast forwarding to the beginning of the blank part of the tape.
4 After Blank Search
The VCR will automatically stop.