Hitachi VT-MX4430A - Manual (Page 62)

DIGITAL DISPLAY
62
DIGITAL DISPLAY
1. PWR. (power) indicator- Lights up when the power is turned on.
2. indicator-
Lights up when a timer recording or an IRT has been set. Flashes if a tape is
not inserted in the VCR even if you set a timer.
• It is normal for the status display (STOP, PLAY etc.) and the tape speed display (SP, LP, or
SLP) to disappear after 5 seconds.
1. PWR. (power) indicator- Lights up when the power is turned on.
2. indicator-
Lights up when a timer recording or an IRT has been set. Flashes if a tape is
not inserted in the VCR even if you set a timer.
3. Cassette indicator-
Lights up when there is a tape in the VCR.
4. VCR indicator- Indicates that the VCR is in the VCR position.
5. REC indicator-
Lights up when the VCR is in the Recording mode. Flashes when a
recording has been paused.
6. Clock/Feature/Channel indicator-
Indicates the current time (when the clock is set), and
briefly displays which feature the VCR is currently performing as the illustration. Indicates the
channel number (when it is set).