Hitachi VT-MX4430A - Manual (Page 24)

SET UP FOR USE
24
• Use the remote control for this procedure.
4 Select 'ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL"=Spanish by using the PLAY/
or STOP/ button. Then,
press the MENU or F.FWD/ button.
NOTE:
This function effects only the language on the screen menu and not the audio source.
LANGUAGE
SELECT
ENGLISH [ON]
ESPANOL
5 Begin Channel preset
Press the F.FWD/ button once. The tuner scans and memorizes all active channels in your
area.
• The VCR distinguishes between standard TV channels and cable channels.
CH 01
TUNER SET UP
6 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
• If "TUNER SET UP'. appears on the TV screen again, check the cable connections. Press
the MENU, F.FWD/ or REW/ button once again and the VCR will begin preset again.
CH 01
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the CHANNEL(CH) or button or directly
pressing the number buttons on the remote control.
Note for using the number buttons:
•
When selecting cable channels which are higher than 99, press the + 100 button first, then
press the last two digits. (Example: to select channel 125, first press the +100 button then
press "2" and "5").