Hitachi VT-MX4430A - Manual (Page 27)

SET UP FOR USE
27
HOUR MINUTE AM/PM
05 -- : -- --
6 Select the minute
Press the PLAY/
or STOP/ button repeatedly until your desired minute appears.
(Example: 40)
Then, press the F.FWD/ button.
SETTING THE CLOCK
MONTH DAY YEAR
03/01 MON1999
HOUR MINUTE AM/PM
05 : 40 --
7 Select "AM" or "PM"
Press the PLAY/
or STOP/ button to point to "AM" or "PM"
(Example: PM)
SETTING THE CLOCK
MONTH DAY YEAR
03/01 MON1999
HOUR MINUTE AM/PM
05 : 40 PM AM
PM
8 Start the clock
Press the RESET/EXIT or F.FWD/ button.
Although seconds are not displayed, they begin counting from 00 when you press the
RESET/EXIT or F.FWD/ button. Use this feature to synchronize the clock with the correct
time.
• When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you
may have to reset the clock.
• If the display shows an abnormal reading or no reading, unplug the power cord for more than
30 seconds. Then plug it back in. And reset clock.
TO CHANGE CLOCK SETTING
1 ) Press the MENU button until the INITIALIZE menu appears.
2) Press the PLAY/
or STOP/ button to point to "SETTING CLOCK". Then, press the
F.FWD/ button.