Hitachi VT-MX4430A - Manual (Page 43)

RECORDING
43
IRT (1:30)
• Recording starts immediately when the REC/IRT button is pressed, whether you are watching
the same or a different channel.
• When the REC/IRT button is pressed 18 times, the VCR returns to the normal recording
mode.
• To stop the IRT operation, press the STOP button on the VCR or on the remote control.
• To show the remaining time, press the DISPLAY button on the remote control so that "IRT"
appears on the TV screen. (It will show up momentarily then disappear.)
• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape is started at
the beginning, is 8 hours using T-160 (or 6 hours using T-120).
• The TV that is connected to your VCR may be turned on or off during IRT.
• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately,
eject the tape and turn power off.