Hitachi VTUX-6450A - Manual (Page 74)

COPYING TAPES FROM A CAMCORDER - 74 -
COPYING TAPES FROM A CAMCORDER
Hookup
You may use your VCR to copy tapes from any camcorder onto standard VHS cassette tapes.
NOTE: If your camcorder is not stereo (has only one audio plug), connect it to the AUDIO IN-L(MONO) input on
the front of the VCR.
* It is not necessary to connect the S-VIDEO jack.
To copy from a camcorder
BEFORE YOU BEGIN...
Connect the camcorder's AV output cable to the audio/video jacks on the front of your VCR.
1 Press the AVX button on remote control, to display L2 (line) on the TV display.
LINE2
2 Press the REC, then PAUSE buttons on the VCR remote control. The VCR will go into Record/Pause.
PAUSE
LINE2
3 Press the PLAY button on the camcorder. You will see the camcorder tape being played on the TV.