Hitachi VTUX-6450A - Manual (Page 66)

EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM - 66 -
DATE ERASE CLEAR
07/17/ 99SAT END PROGRAM
Types of Delayed Recordings
ONE TIME
Records one show at a particular date and time.
DAILY Records a show at the same time every day of the week, Monday throught Friday.
WEEKLY Records a show at the same day and time every week.
6 Press the TAPE SPEED button to choose recording speed SP (standard play) or EP (extended play).
The screen will display all the details of the program you chose. Check the CH number to make sure it is the right
one. If not, you need to check your VCR Plus+ channel setup again.
ONE TIME PROGRAMMING
AM PM
CH START END
03 06 : 30PM 07 :00PM EP
ONE TIME / DAILY / WEEKLY 5
DATE ERASE CLEAR
07/17/ 99SAT END PROGRAM
7 Review the screen to be sure everything is set as you want, then press the PROGRAM button to
complete your programming or continue with additional programs.
• This message will appear.
FOR TIMER RECORDING
TURN POWER OFF
8 Press the POWER button to turn off the VCR.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have programmed.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (With the safety tab still attached) to record on.
• If using a cable box the VCR can control, turn on the cable box before the time the recording is to begin. Please
refer to "Cable Box Setup", on Page 25 in the "First Time Setup" section.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
Caution of VCR Plus+ Recording
After entering a PlusCode number, check the information displayed with the "PROGRAM REVIEW". If there is
(are) any unnecessary program(s), please cancel or correct it (them). Please refer to Page 53, "Reviewing what
you have programmed".