Hitachi VTUX-6450A - Manual (Page 33)

PRE-TUNING THE VCR TUNER - 33 -
PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Presetting the received channels without using a cable box (Hookups
[A], [B], [C] or [D])
1 Press the POWER button to turn on the VCR.
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
MENU
1 2 3
REVIEW SETUP CLOCK
4
CHANNEL
—————————————————
7 ENGLISH 8 FRANÇAIS
END GUIDE
4 Press the (4) button to select the CHANNEL PRESET operation.
CHANNEL PRESET
1 CATV1 2 AUTO
CH SOURCE CHANNEL SET
3 CH LIST 4 VCR PLUS+
ADD/ERASE SETUP
5 CABLE BOX
SETUP END GUIDE
5 Press the (1) button to select the type of receiving setup you have:
CHANNEL PRESET
1 ANT 2 AUTO
CH SOURCE CHANNEL SET
3 CH LIST 4 VCR PLUS+
ADD/ERASE SETUP
5 CABLE BOX
SETUP END GUIDE
ANT: Internal or external antenna