Hitachi VTUX-6450A - Manual (Page 67)

EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM - 67 -
Using the VCR Plus+ system to record a program (by using VCR's display)
You can use the VCR Plus+ system to program the timer, observing the VCR's display, without turning on the
power to the VCR and TV.
Notes:
• If you use the VCR Plus+ system to program the timer while observing the VCR's display, you can only program
a one-time recording.
• To stop programming, press the POWER button to turn the VCR power on.
1 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically and VCR Plus+ recording won't
operate.
2 Press the POWER button to turn off the VCR.
3 Press the PROGRAM button.
The clock display switches to the indication shown on the right.
• If eight programs have already been stored in memory, "FULL" will appear in the VCR's display.
4 Press the number buttons to enter the PlusCode number of the program you want to record.
Note: This number can be up to eight digits. If you enter a wrong digit, press the CLEAR button and enter the
correct one.
5 Press the 100/ENT button to enter the PlusCode number in the VCR's memory.
The start time and channel will appear. Check the details of the program.
• If "Err" appears, check the PlusCode of the program and try to enter it again.
6 Press the PROGRAM button to complete your programming or continue with additional programs.