Hitachi VTUX-6450A - Manual (Page 63)

EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM - 63 -
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM
This setup should be performed if you are using an Antenna or Cable without a cable box. (Hookups [A],
[B], [C] or [D].) If you receive all your channels through a cable box (Hookups [E], [F] or [G]) please refer
to page 25 "cable box setup" in "First Time Setup" section.
VCR Plus+ setup - Channel setup
The following shows the procedure you should perform when you are receiving the Cable News Network (channel
42 with the VCR Plus+ system) on channel 38.
Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or Cable (No Cable Box)
Setup (Hookups [A], [B], [C] or [D].)
1 Turn on the TV and select the Video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the (4) button to select CHANNEL PRESET.
CHANNEL PRESET
1 CATV1 2 AUTO
CH SOURCE CHANNEL SET
3 CH LIST 4 VCR PLUS+
ADD/ERASE SETUP
5 CABLE BOX
SETUP END GUIDE
4 Press the (4) button to select VCR PLUS+ SETUP.
A small arrow points to a blank "– –" in the CHANNEL column.
VCR PLUS+ SETUP
VCR+ CH CHANNEL
01 – –
02 – –
SCROLL CH
END GUIDE
Note: If your broadcast channel number is the same as the VCR Plus+ Channel in your TV listing do not enter
any number.