Operating in the remote control – Hitachi VTUX-6450A User Manual
Page 12
REMOTE OPERATION
- 12 -
Operating in the remote control
Operating the VCR:
1 Make sure there is no obstacle between the remote control and VCR's infrared receiver.
Note: You cannot operate the VCR if there is an obstacle (for example, coffee table, sofa, etc) between the VCR
and remote control.
2 Point the remote control at the VCR's infrared receiver and press the required button on the remote
control.
Note: If the remote does not work even at close range, try replacing the batteries with two fresh "AA" batteries.
About the illuminated buttons:
• When you press any of the illumination buttons, the illumination will turn on.
The illumination goes off 5 seconds later automatically, if you do not press the buttons.