HP Photosmart 7700 - Manual (Page 23)

basics guide
set the defaults on your printer
19
revert to the factory default settings
If you made adjustments to the default settings, you can reset the printer to the
original factory settings at any time. To revert to the factory default settings,
follow these steps.
Note: The language and country/region settings you chose will not change
if you revert back to the factory default settings.
1 On the printer’s control panel, press the M
ENU
button.
2 Press the S ELECT P HOTOS button until Preferences appears highlighted
on the LCD screen, and then press the OK button.
3 Press the S ELECT P HOTOS button until Restore defaults appears
highlighted on the LCD screen, and then press the OK button.
4 Press the S ELECT P HOTOS button to highlight Yes or No, and then press
the OK button.
set LCD screen language and country/region
Use the Language option to change the language of the LCD screen prompts on
the printer. The country/region setting determines what photo and paper sizes
the printer’s LCD screen displays. To change the language and country/region
settings on your printer, follow these steps.
Note: The language and country/region settings will not change if you
revert to the factory default settings. You can change the language and
country/region settings only by following the steps in this section.
1 On the printer’s control panel, press the M
ENU
button.
2 Press the S
ELECT
P
HOTOS
button until Preferences appears highlighted
on the LCD screen, and then press the OK button.
3 Press the S
ELECT
P
HOTOS
button until Language appears highlighted
on the LCD screen, and then press the OK button.
A list of languages appears on the LCD screen.
4 Press the S ELECT P HOTOS button until your desired language appears
highlighted on the LCD screen, and then press the OK button.
5 Press the S
ELECT
P
HOTOS
button to highlight Yes to confirm your
language selection, and then press the OK button.
A list of countries and regions appears on the LCD screen.
6 Press the S ELECT P HOTOS button until your desired country or region
appears highlighted on the LCD screen, and then press the OK button.
The prompts and options on your printer’s LCD screen now appear in the
language you selected.