Channel add/erase – HANNspree MAK-000011 User Manual

Page 52

Text mode
Original mode

Channel Add/Erase

Press the CH DOWN button to select
CH ADD/ERASE.

Press the VOL UP button. The OSD
menu display switches to the
following screen.

Press the CH UP/CH DOWN button
on the front panel to select a
channel.

Add Channel
Then press the VOL UP button on
the front panel to add the selected
channel. The channel number
changes from yellow into green after
adding the channel.
Erase Channel
Then press the VOL DOWN button
on the front panel to erase the
selected channel. The channel
number changes from green into
yellow after erasing the channel.

Note

You can still access the erased channel by

entering the channel number using the

number buttons on the remote control. Use

the Add Channel steps if the channel was
erased accidentally.

TV
TV/CATV

AUTO PROGRAM

ADD/ERASE

SEL

ENTER

CATV

ERASE ADD

CH UP/DOWN