HANNspree MAK-000011 - Manual (Page 31)

30
9
Using the TV
Turning the TV On and Off
1
Press the POWER button on the remote control or on the TV
control panel. The power indicator LED on the front of the TV changes
from red to green, indicating that the power is on.
2
Press the POWER button again. The power indicator LED
changes from green to red, indicating that the TV is off.
Switching Source Signals
Press the SOURCE button to select different source signals.
CH, AV1, and AV2 appear on the top right corner of the screen in that order.
Adjusting the Volume
1
Press the VOL UP button on the remote control or on the TV control
panel to increase the volume.
2
Press the VOL DOWN button to decrease the volume.
3
Press the MUTE button on the remote control. The word “MUTE”
appears on the top right corner of the screen and sound is turned off.
4
Press the MUTE button again to restore the original volume.
Selecting Channels
1
Press the CH UP button to increase the channel number by one.
2
Press the CH DOWN button to decrease the channel number by one.
3
Enter the specific channel number by pressing the number buttons
on the remote control. The channel is displayed on the screen.